engine ID

Home › Forums › General questions › Others › engine ID

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 17, 2009 at 4:57 pm #2363
    Anonymous
    Inactive

    You could give an engine 2 Id numbers say 1 and 3. This would make an engine go the same way as number 1 then next controler will send them different ways. Or you could use a control track which means you don’t need to use ID numbers. With this way the next train will go to another track and you can make it as big as you like. Go to my web site for more control track ideas. I have tryed to show you both ways to do it in a couple of demo’s. Just manually push the big trains. If ya need any help let me know.

    http://www.mediafire.com/download.php?omdmgzjmyjm

    Dave

    June 17, 2009 at 5:57 pm #2364
    Anonymous
    Inactive

    Hay Avalanche,

    See There .

    Roger did a track with 8 ways.

    Peter

    June 18, 2009 at 6:29 pm #2365
    Anonymous
    Inactive

    thanks guys :)

    the engine ID’s are a bit like binary bits if I look to the example programs of Austindave

    June 20, 2009 at 12:11 pm #2366
    Anonymous
    Inactive

    Hay Avalanche,

    see Gnomes Site and you´ll find a list with all objects for RTR inclusive origins and our stuff.

    See under ID´s 106 107 there are the All types of sigs but you can use the lights or semafores only on these 2 ID´s.

    Peter

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.